 |
|
|
|
| Type : RLK |
KHEPRI |
| With highly efficient sensor system. |
 |
|
 |
|
| A new water stain remover system as standard feature |
 |
This system helps to remove water stain (stain remain after a rain) by
special chemical and brushing. and shorten the time spent for cleaning
hard sticking water stain. |
 |
「Water stain remover」
This powder does not include polishing compound and does not hart the paint
of a vehicle while removing water stain. |
|
| Prism coating system （Jump to 「Stain」 page.） |
 |
 |
 |
| This new polymer coating system named PRISM COAT shines and polishes the
painted car body far better than our previous polymer coating. It also
protect the painted body against water stain. |
Water drops on the new polymer coating : PRISM COAT comparing to our previous
polymer coating. |
The base of the PRISM COAT is FK-2 which is already popular amoung the
user of our car wash. It makes double coating of FK-2 and PRISM COAT. |
|
| FK-2 polymer coating （Jump tp 「FK-2」 page.） |
|
|
 |
 |
| This FK-2 is now very popular amoung the user of our car wash system. |
Ordinary wax can not protect vehicle from acid rain and ultra-violet sun
ray. |
But FK-2 polymer coating can protect vehicle from acid rain and ultra-violet
sun ray. |
|
| Multiple sensor system |
 |
|
| A 175 cross beam sensor system traces the shape of avehicle automatically
and controls the movement of brushes and blower nozzle precisely. All you
have to do is just to press a wash program and start button. (some vehicle
with particular accessry may need to operate with extra button or manual
button) |
|
|
|
|
 |
| Around the center of the front and rear bumper is washed most elaborately
without any unwashed arear with double crossing movement of the side brush. |
 |
|
|
 |
The side brush slant approx. 5 degree against the side body of a vehicle
so that it would not leave any unwashed part along the roundly designed
car body. |
 |
A mirror of a van type vehicle which is attached at the edge of the rear
hanging downward has been a problem for the top brush to dodge properly
to avoid hitting and damaging it. But the multiple sensor system has solved
this problem by clearly spotting the mirror and controling the top brush
precisely to dodge the mirror without damaging.（Jump to 「ALADIN Cloth」 page） |
|
|
 |
| The side blower nozzle is slanted about 3 degree to the opposite direction of car wash entrance to lead water drops downward and increase the drying effect.. |
 |
|
|
 |
A safety ring switch si attached to the blower nozzle to prepare for "just
in case". This ring safety switch actuate immediately when the ring
touches the car body and lift. |
 |
Around the rear trunk where water tends to remain more than other parts
of a car is blew twice for better dry effect. |
 |
「Option」
The top blower nozzle slant about 15 degree at the rear/front window shield
and bumper arear for the better dry effect. |
|
|
「ALADIN CLOTH brush」
（Standard feature） |
「VO foam brush」
（Your sellection） |
「VO pliant brush」
（Your sellection） |
 |
 |
 |
| This soft cloth brush is first introduced by us in 1994. Since then this
brush has been accepted and supported by many users of our car wash. IThe
most recent soft cloth brush is far better improved in wash quality, low
noise and durability. |
This foam brsuh is soft but tough and cut with sharp edge so that the edge
can scrape of dirt from the painted car body. The tip of each brush fragment
is cut in two and cover even narrow space of a vehicle. The volume of the
brush is also up about 20% for better wash quality. |
This pliant brush is very soft and thin but very elastic at the same time.
This very traditional filament tyep of brush is still the bets in wash
quality and to cover the as much space as possible. The volume of brushes
has also been increased for better wash quality. |
|
|
| OPTION |
Options available for KHEPRI |
 |
「Under chassis wash system」 （Independent operation）
This under chassis wash system is independently operated from car wash
machine. This system is placed at the entrance of the car wash and spray
high pressure water from 6 nozzles against under body of a vehicle. |
 |
「Tire cleaner」
A newly developed wheel wash system catches the right position of all the wheels precisely and clean the wheels without missing. |
 |
「Side safety switch system」
To prevent accident while operating car wash, a side safety switch can
be installed at the edge of the car wash. The car wash stops immediately
when this switch is actuated. |
|
|
| Measurement of the main car wash machine |
 |
|
|
|
|
| 1 |
Insutallation space required |
4,000mm(W) x 11,000mm(L) x 3,500mm(H) |
| 2 |
External measure |
3,600mm(W) x 2,750mm(L) x 2,985mm(H) |
| 3 |
Max, vehicle size |
2,300mm(W) x 2,300mm(H) x 5,000mm(L) |
| 4 |
Power requirement |
11.72Kw （Car wash and water pump only, with no option) |
| 5 |
Type & number of brushes |
Soft cloth brush, 5 brushes （+2 wheel brush as option) |
| 6 |
Operation speed |
Inverter controlled, 16 speed 1) Shampoo wash : in 3 minutes average
2) Wax wash 3'20" 3) FK-2 wash 5'00" 4) PRISM wash 6'25" |
| 7 |
Wash program |
1) Shampoo wash 2) Wash & Wax 3) Wash & FK-2 4)Wash &
PRISM |
| 8 |
Operation method |
Easy operation by two touch button. |
| 9 |
Drying capacity |
2.8Kw x 2 |
| 10 |
Water consumption |
1) Shampoo wash 80L。 2) Wax wash 80L。 3) FK-2 wash 115L。
4) PRISM wash 135L。 |
| 11 |
Chemical used |
1) Detergent 2) Smart Wax 3) FK-2 4) SCP |
|
| ＊ |
Specification are subject to be modified without notice. |
| ＊ |
Some of the pictures are for Japanese use only and may differ from the export model. |
| ＊ |
Some pictures include option(s). |
|
|
|
|
 |
